+86 15813739257    Nolan@atop8.com
Detailed Information
You are here: Home » Solutions » News » Industry News » Outdoor front service led display safety precautions and disassembly

Outdoor front service led display safety precautions and disassembly

Views: 0     Author: Site Editor     Publish Time: 2022-05-09      Origin: Site

In the installation and maintenance of Outdoor Front service led display module, often use ordinary instruments, these instruments are more complicated to use the process, and can only be used on certain occasions, and in the use of the process is easy to disassemble the instrument leads to damage, and even to the instrument circuit board, lampshade, etc., causing damage, affecting the Outdoor Front service led display function and the appearance of the beauty. It can be seen that the existing apparatus in the use of the process there are obvious shortcomings and defects, the urgent need for further improvement, how to create a not to damage the module, to ensure the safety of the module, easy to operate the Outdoor Front service led display module installation and removal mechanism, become more and more popular products.



l  Outdoor front service led display installation and removal method

l  Outdoor front service led display protection measures



Outdoor front service led display mounting and dismounting method

With the new Outdoor Front service led display module mounting and dismounting, so that it has the advantages of not damaging the module when using, easy to operate, and can adjust the size of the suction force on the object, thus overcoming the shortcomings of the existing technology. To solve the above technical problems, the use of new LED front maintenance Outdoor Front service led display module installation and removal, including screw, magnet mounting plate, magnet, limit isolation column and positioning plate, where: magnet fixedly mounted on the magnet mounting plate, magnet mounting plate and screw bottom fixed connection, limit isolation column fixed in the positioning plate, screw can be relative to The screw can rotate up and down relative to the positioning plate and is connected to the limit isolation column. Further, the upper end of the limit isolation column is provided with a limit plate that blocks the upward movement of the magnet mounting plate, and the screw is rotatably connected to the limit plate. The positioning plate is provided with a positioning sleeve matching the magnet. The upper end of the screw is provided with a five-star handle for rotating the screw, and the bottom end is provided with a screw stopper. The positioning plate is provided with a limit hole with a diameter smaller than the diameter of the magnet. After using the above design, Outdoor Front service led display has the advantages of not damaging the module when using, easy to operate, adjustable to the size of the suction force on the object, and easy to carry and safe to use.



Outdoor front service led display protection measures.

For the installation of building and screen body lightning protection measures

In order for the display to avoid strong electromagnetic attacks caused by lightning, Outdoor Front service led display screen body and outside the protective layer of the packaging must be kept grounded, and the resistance of the grounded line should be less than 3 ohms, which can make the current caused by lightning can be discharged from the ground in a timely manner.

The whole screen body waterproof, dustproof and moisture-proof measures

Outdoor front service led display in the box and box connection, as well as the screen body and the combination of force installation objects to achieve a seamless connection to avoid leakage of water and moisture. In the internal screen body to have good drainage and ventilation measures, if the internal water situation can be dealt with in a timely manner.

About Outdoor front service led display circuit chip selection issues

In some winter, the temperature can generally reach minus ten degrees in the region, so in the choice of circuit chip, must choose the working temperature in the negative 40 degrees Celsius refers to 80 degrees Celsius industrial-grade chip, to avoid the low temperature caused by the display can not start the situation.



Shenzhen Atop Led Opto Electronic Co., Ltd has fully passed ISO9001, CE, FCC, EMC and ROHS certifications, and our system products have reached an international advanced level through cooperation with top international technology companies. We always insist on "forging ahead and innovating" to provide our customers with the best quality products and services that fit the market.


Contact us,you will get a better quote!

Shenzhen Atop Led Opto Electronic Co., Ltd is a global supplier specializing in R&D, production and sales of LED display screens. The main products include LED display rental series, indoor and outdoor advertising screen series, high-definition small-pitch series, sports stadium screen series, traffic guidance screen series and special-shaped screens.It is located in Bao' an, Shenzhen, the most centralized area 
Contact us

Contact Us

  +86 15813739257
 The 3rd Floor, Jiada Industry park,Tangtou North Road, Shiyan Town, Baoan district, Shenzhen,China
Copyright©Shenzhen Atop Led Opto Electronic Co., Ltd. Support By Leadong | Sitemap